CHFRX - FRESCO HEAVY COAT TEXTURE READY MIX
- MSDS: CHFRX
- Manufacturer: GOLD BOND BUILDING PRODUCTS
- Product Name: FRESCO HEAVY COAT TEXTURE READY MIX
- National Stock Number: 5640-00N086710
Product Identification
Product ID:FRESCO HEAVY COAT TEXTURE READY MIX
MSDS Date:05/09/1989
FSC:5640
NIIN:00N086710
MSDS Number: CHFRX
Responsible Party
CHARLOTTE, NC 28211
US
Emergency Phone: 704-365-7300
Info Phone: 704-365-7300
Preparer: M.W. KALETA
Cage: 9N701
Contractor
Telephone: 704-365-7300
Cage: 9N701
Ingredients
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)
CAS: 14808-60-7
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
SILICATE, MICA; (MICA)
CAS: 12001-26-2
RTECS: VV8760000
OSHA PEL 20 MPPCF
ACGIH TLV: 3 MG/M3 RDUST
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/M3 RDUST
PERLITE
CAS: 93763-70-3
RTECS: SD5254000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
PALYGORSKITE; (ATTAPULGITE CLAY)
CAS: 12174-11-7
RTECS: RT6400000
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT:CONTINUED AND PROLONGED
CONTACT MAY CAUSE TRANSIENT IRRITATION. EYE CONTACT:DIRECT CONTACT
MAY CAUSE IRRITATION. INHALATION:EXPOSURE OCCURS WHEN SANDING DRIED
PRODUCT. TARGET ORGAN:RESPIR ATORY SYSTEM. SIGNS AND SYMPTOMS OF
EXPOSURE TO AIRBORNE DUST: CONTINUED AND PROLONGED EXPOSURE TO
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
MONOGRAPHS, VOL 68, 1997:GRP 1. NTP 7TH ANNUAL RPT ON CARCINS,
1994:ANTIC TO BE CARCIN.
Effects of Overexposure:HLTH HAZ:AIRBORNE DUST CONCENTRATION IN EXCESS
OF PEL/TLV MAY RESULT IN COUGH, DYSPNEA, WHEEZING AND IMPAIRED
PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:OVEREXPOSURE WOULD AGGRAVATE
RESPIRATORY SYSTEM DYSFUNCTIONS.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . EYES:IMMEDIATELY FLUSH W/WATER
FOR AT LEAST 15 MINUTES & GET MEDICAL ATTENTION. SKIN:FLUSH & WASH
W/SOAP & WATER. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHAL
:MOVE EXPOSED PERSON TO FRESH AIR AT ONCE. IF NOT BREATHING
INITIATE PULMONARY RESUSCITATION. GET MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:DRY CHEMICAL, FOAM, WATER FOG OR SPRAY.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SHOVEL OR SCOOP UP BACK INTO CONTAINER FOR USE
IF POSSIBLE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. WET SAND OR SPONGE
JOINTS, NAILS & BEAD.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH APPRVD RESP FOR TOX DUSTS IS REC IF
PEL/TLV IS EXCEEDED. IF DRY SANDING & PEL/TLV ARE EXCEEDED USE REC
NIOSH APPRVD RESP PROT. IT IS REC THAT NIOSH APPRVD RESP, FOR PROT
AGAINST TOX DUSTS, BE WO RN WHENEVER WORKING W/THIS PROD (SUPDAT)
Ventilation:PROVIDE VENTILATION TO MAINTAIN A DUST LEVEL BELOW PEL/TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT:RESULTS IN AIRBORNE DUST EXPOSURE EXCEEDING PRESCRIBED
LIMITS.
Chemical Properties
Appearance and Odor:A WHITE PASTE W/MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:NOT A HAZARDOUS WASTE. DISPOSE OF I/A/W
APPLICABLE FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.